Comandante C40 MK4 Sunset Nitro Blade Coffee Hand Grinder - Orange

Comandante C40 MK4 Sunset Nitro Blade Coffee Hand Grinder - Orange

High-Precision Tool

The refined geometry and structure of the Nitro Blade burr offer the best grind performance and particle distribution, which works great with brewing fresh ground specialty arabica beans. Manufacturing a Nitro Blade is a serious engineering task which requires special tools and machinery, excellent craftsmanship and lots of experience. High-nitrogen martensitic steel is extremely difficult to work with. But when finished, it is tough, highly wear resistant and has a high degree of edge retention.

Clear Design

Built for true coffee enthusiasts and specialty coffee connoisseurs, the C40 Nitro Blade is a robust high performance coffee hand grinder with an advanced burr set design. The selection of the burr material is the proud result of dedicated research and development.

Nitro Blade Burr Set

The Nitro Blade burr set is the ultimate performance choice. It “cuts” coffee beans in a very unique way. The grind result is extremely exact and very uniform with the least amount of coffee dust. Both ring and core are cut out of a solid block of high-alloyed, high-nitrogen stainless steel. This makes the Nitro Blade very sharp and strong with excellent edge retention and wear resistance. Nitro Blade is also extra non-corrosive and shows an excellent cut performance.

Axle with Micro Ball Bearings

The center axle is fixed and supported by two micro ball bearings for better distribution of force and grind momentum. Both micro ball bearings are encapsulated with rubber for protection and smooth operation.The turning crank is made of stainless steel and can be removed to better fill the C40. The clear disc on the crank has been pressed onto the stainless steel quite solidly, but can be adjusted if necessary.

Grind Grade Selection - 3-Way Click Action

The grind grade selection dial has been designed like a three-legged star with a proper click action. We use three independent micro steel ball click units to assure a balanced pressure scenario for the burr conus. It is located at the bottom of the C40. Use three fingertips and turn the star clock-wise to get a finer grind result or counter-clock-wise for a more coarse grind. The click action firmly locks in your preferred grind grade.

But please be careful with your fingers when you operate close to the burr edges. The Burr edges of Nitro Blade are extra sharp. You can easily cut and harm yourself if you are not careful.

100% Natural Oak Wood

The wooden knob is made by a friend in the Black Forest region. It is made of 100% natural oak wood and is mounted with a push-button-mechanism onto the crank. You are able to remove it and click it back on. Shape and form of the wooden knob have been designed for comfortable and solid feel during grinding. All wooden surfaces have been treated with a safe Wax-Oil.

Safe TRITAN™ (BPA-free)

All burr frame parts in synthetic material are made with BPA-free copolyester TRITAN™ which is known to be a very robust and break-resistant synthetic material. According to Eastman, TRITAN™ is not only BPA-free, but it is also not manufactured with bisphenol-S or any other bisphenol compounds. In addition, third-party labs have tested TRITAN™ and the results have emonstrated that it is free of estrogenic and androgenic activity. A very safe material to hold your precious coffee beans.

Glass Jar with Lid

The glass jar at the bottom holds 40 grams of coffee which gives you approximately 4–5 cups of coffee. We use glass because it is a perfect storage device and you can easily clean it with hot water. You get 2 glass jars with the C40. One in clear and one in brown. Plus, you get a lid for your extra glass jar. The lid is made of Urochem 371, which is manufactured from renewable natural resources and can be recycled.